I. A few simple ways to identify auto parts

1 look at the original packaging accessories packaging is generally more standard, uniform standard specifications, clear and formal handwriting, counterfeit products packaging printing is poor, often easy to find defects from the packaging. phlilps car lights real and fake identification.

2. Look at the colour of some original accessories. If other colours are encountered, they are counterfeit parts.

3. Look at the printing, casting and markings of the original parts, counterfeit products have a rough appearance.

4. Illegal merchants will simply process the used parts, such as dismantling, mounting, splicing, splicing, painting, etc., and then sell them under the guise of qualified products, illegally gaining high profits. jbl car horn real and fake identification.

5. According to the design requirements, the texture of the original accessories material using qualified materials, counterfeit products more modest and inferior materials.

6. Although the appearance of poorly crafted products is sometimes very good, but due to poor production process, easy to crack, sand holes, slag, burr or collision. For example, the cylinder gasket extrusion deformation, the use of easy to cause poor sealing, ablation, resulting in oil leakage, gas leakage, water leakage; piston and piston ring working surface burrs, easy to pull the cylinder.

7. see "storage" if the car parts appear dry cracking, oxidation, discoloration mirror or aging problems, may be due to poor storage environment, long storage time, poor material itself and other reasons caused by
8. Look at the "joint" if the clutch plate rivet is loose, the brake leather tube is de-glued, the electrical parts joint is de-welded, the paper cartridge joint is off, then it cannot be used.

9. look at the mark of some official parts, such as when the gear mark, piston top mark and other assembly marks to ensure the correct installation of parts can not be purchased. jbl car horn how to distinguish the real from the fake.

10. Look at the assembly parts of the gauge must be complete and intact to ensure the smooth operation and normal operation of the pretend car. Some of the small parts on the assembly are usually leaking "water goods", these have brought difficulties to the installation of the car. Due to a shortage of individual small parts, entire assemblies are scrapped.

11. To facilitate storage and prevent parts from colliding, parts are shipped with a protective layer. For example, bushings, large shaft tiles, pistons and valves are generally protected by paraffin wax to avoid damage to their surfaces. If these important parts do not have a protective coating, they are mostly "waterborne".

12. Check the documentation for some important parts, especially assemblies, such as carburetors, distributors, generators, etc., which generally come from the factory with instructions and certificates to guide the user in installation, use and maintenance. If these are not available, they are mostly counterfeit and shoddy products. Moebius auto parts.

13. When buying auto parts according to specifications, the main technical parameters should be identified and special technologies should meet the requirements of use. Some counterfeit and substandard products look similar to the real product, but are not properly installed, either large or small, and are always unsatisfactory to use, leaving the potential for accidents.